Quote Originally Posted by joecar View Post
You can fail the MAF without un-wiring it (if you don't understand this, then you did not understand the AutoVE tutorial)...
The AutoVE tutorial I have says to unplug the MAF, I understand that completely. I thought I would be able to turn off the MAF as you posted with these settings:

"To fail MAF set both C2901, C2903 to 1 (which I can do) and set C6001 P0101,2,3 to 1-trip (which I can't)".

I have V1 and the only options are MIL & NO MIL. Yes, I am using my 5-pin MAF (no SD).