{B6001} Spark Dwell Time
"Dwell time is the amount of time (in ms) that the coils are charged before firing. If the dwell is set too low a weak spark can occur, if the dwell is too high there is a risk of overheating the coils."

Is the description that EFILive gives me, has anyone ever played with this table. I would think that increasing the dwell time would give a more powerful spark, for better efficiency/power. I have the MSD coils on my car so I would think that they could handle a little more dwell time, maybe 1-2 ms.

What doesnt make sense to me is that the dewll time to produce 1.0 Volt at 800 Rpms is 28.9, while the dwell time to produce an 8.0 Volt spark at 800 Rpms is 8.9. So the table indicates that it takes less time to make a spark of greater voltage. Anyone have any ideas?