Results 1 to 10 of 133

Thread: What to Tune First

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #29
    Member Dirktdolman's Avatar
    Join Date
    Oct 2014
    Posts
    92

    Default

    I have a Vin: U and I just ran the key on engine off pressure test and it came back with 48 PSI.

    I put a new Delphi Fuel Pump (FG0053), Napa Fuel Pressure Regulator (2-19782) and fuel pump relay on 24 Nov 2014. I would have put a new filter in at the same time but the one in there was only about 6 months old.

    I did some research on Napa's website about the Delphi pump. Napa site says fuel Pump Pressure rating: 425 kPa. I converted this to 61.64103865 psi.

    So something is wrong. Weak pump, weak FPR or plugged filter. I will replace the filter tomorrow and re-run the test.
    Last edited by Dirktdolman; January 25th, 2015 at 06:40 PM.
    2003 Chevrolet Silverado 2500HD 6.0L Automatic 4 X 4

Similar Threads

  1. Replies: 5
    Last Post: August 5th, 2008, 02:35 PM
  2. Tune VE and MAF tables or leave VE stock and tune MAF only
    By BlackGMC in forum Gen III V8 Specific
    Replies: 2
    Last Post: August 4th, 2008, 08:05 PM
  3. What else can I tune without scanning or black boxen it? Tune history inside.
    By Round Rock TJ in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 3rd, 2007, 02:27 AM
  4. Convince me to change to a 2bar tune...709rwhp through an EFI maf tune.
    By onfire in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 7
    Last Post: June 16th, 2006, 12:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •