Hi Guys,
Have just flashed an 11 lml with a tune , tunes great but now, the cruise cuts out intermittently
and most time it cuts out you can hear the abs pump cycle. Initially ( cold this morning) it
actually flashed the stability control yellow warning light at the same time for a second.
After that I did a full yaw sensor relearn etc and now its not flashing the light but you can see on
the scan tool it cycles the abs pump as it kicks out of cruise. have checked all the sensor outputs
on the scan tool making sure nothing is turning it off, wheel speeds are all the same , but it still does it , mostly just once within two
minutes of startup then seems to work fine after that. Any ideas?