Results 1 to 4 of 4

Thread: Surge and stall with dual pumps

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. June 16th, 2016 #1
    bcbracing
    bcbracing is offline
    Junior Member
    Join Date
    Nov 2011
    Posts
    18

    Default Surge and stall with dual pumps

    Workin on a 09 6.7 that we did 100% over exergys along with a PPE dual fueler setup. Sometimes when you put the truck into gear it will start surging and eventually stall. The truck does have some rail surge on higher throttle pulls as well. I messed around with the base duty cycle table a bit to see if it would help but it still seems to do it. I have attached the tune file and idle surge datalog. Any help would be greatly appreciated
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. e39 ecu 6speed auto T43 upgrading stall converter to 3,000RPM hi stall
    By 3L SIDI in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 0
    Last Post: January 21st, 2015, 04:26 AM
  2. Dual fueler SURGE AT WOT issue ECM overcorrecting? PID LOOP?..Log Inside
    By Dmaxink in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 5
    Last Post: June 26th, 2012, 09:18 AM
  3. Is there a way to increase the PWM for the pumps on an LS1?
    By Highlander in forum Gen III V8 Specific
    Replies: 2
    Last Post: December 8th, 2010, 10:01 PM
  4. EFILIVE Throttle pumps
    By kingna355 in forum Gen III V8 Specific
    Replies: 1
    Last Post: February 6th, 2010, 03:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules