Results 1 to 4 of 4

Thread: DBW issues

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Sep 2013
    Posts
    24

    Default DBW issues

    I have a LQ4 was a DBC but I converted over to a DBW with a TAC controller part number 12588923 and its pedal assembly. It works till it hits 85% throttle and then it closes the throttle blade and will not open till you cycle power on the ECM. I did a complete reflash of the ecm with a 2003 LQ4 and DBW. Also it has an idle issue but the engine is all stock. I have added the tune file and a log file if anyone can look at them and show me what might be going on with it.
    Attached Files Attached Files

Similar Threads

  1. DBC to DBW.
    By camaro68 in forum Gen III V8 Specific
    Replies: 8
    Last Post: August 17th, 2017, 02:42 AM
  2. Remove DBW
    By jojonoumea in forum Gen III V8 Specific
    Replies: 2
    Last Post: June 8th, 2016, 11:30 PM
  3. DBW Issues
    By catman3126 in forum Gen III V8 Specific
    Replies: 5
    Last Post: February 24th, 2014, 09:19 AM
  4. dbw to cable TB
    By driver456 in forum Conversions / Aftermarket Parts
    Replies: 1
    Last Post: June 28th, 2011, 01:02 PM
  5. DBW Issue
    By sparkinak in forum Gen III V8 Specific
    Replies: 5
    Last Post: August 23rd, 2008, 01:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •