Yes sir I can albeit a bit reluctant due to embarrassment lol

I had a turbo car i built when i was 19 back in 07-08... Put a SD operating system on it and tuned the car easily. Car is still driving around 10+ years later with my tune. But this e38 has me really screwed up.

Its currently set up totally open loop with DFCO turned off. I basically turned all that off... started with idle stuff till it idled well enough to drive (intending yo return to it and do it right). Then was going to put it into SD and tune the VE table. That is where i can into this issue. So i hacked up the maf table and a number of other htings till the truck ran ok and left it there lol. The Truck idles fair and driving it is surprisingly bearable with this hacked up tune. But id like to do it right!

Be easy on me lol.


5.29.19_R0005.ctz