LC-1 widband hook up

[NAH]

Which side are you needing (O2 or PCM)? If it's the O2 side, you could possibly track down someone (internet classifieds, ebay, etc...) with with some old bad O2's, have'm shipped the cut the sensors off. If it's the PCM side, you might check with a dealership (local or otherwise). I've been able to replace all my PCM side connectors, when I break one, via local GM dealers.

It's the O2 side. Someone from the Piston heads forum has posted this link:

http://www.speedscenewiring.com/gmconnectors.htm

The one I want is the counterpart for nº 11 (heated O2 sensor). I have found a site in the US that sells a connector kit but I nned to make sure that the connectors are compatible:

http://www.ledfoote.com/osc/product_...a0f2e89f2dad27

There seem to be sqaure & round plastic mouldings. As I can't get to the O2 conenction on my car, I can't confirm the exact type, so any help would be appreciated.

The next step will be to email my cousin in OZ & ask him to look at an O2 sensor for a Monaro. Vauxhall in the UK are next to useless.

BTW, for you boys in OZ, looking good for the Ashes