Results 1 to 7 of 7

Thread: Problem with commanded AFR in OS5

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. April 19th, 2007 #1
    Jason S.
    Jason S. is offline
    Senior Member
    Join Date
    Apr 2005
    Posts
    126

    Default Problem with commanded AFR in OS5

    I am having an issue with commanded afr in OS5 it would appear. I am getting values logged that I don't have in the commanded open loop table. I'll attach a log as well as the cal...maybe I'm missing something but I don't think so. At Idle it showing commanded afr of 10.29.... Any help is greatly appreciated!

    Thanks

    Jason.
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. GM.EQUIVRATIO PID = 'commanded EQR'?
    By Mr. P. in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: December 4th, 2009, 12:08 PM
  2. Questions on commanded AFR
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 7
    Last Post: July 9th, 2009, 08:59 AM
  3. “Un-commanded” AFR at WOT
    By Rontune in forum Gen III V8 Specific
    Replies: 13
    Last Post: July 3rd, 2009, 02:58 PM
  4. commanded WOT Afr Im confused
    By blazinblue in forum General (Petrol, Gas, Ethanol)
    Replies: 22
    Last Post: May 14th, 2009, 04:32 AM
  5. commanded afr
    By 69camaro5speed in forum General
    Replies: 3
    Last Post: December 29th, 2005, 05:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules