Do I need PID GM.AFR? for wide band in an LS2 (LC-1) I get RED X
For an LS2 I believe I would need GM.AFR_B
If this is the case then the LC-1 calculation would be incorrect....
Thanks - Bob
Do I need PID GM.AFR? for wide band in an LS2 (LC-1) I get RED X
For an LS2 I believe I would need GM.AFR_B
If this is the case then the LC-1 calculation would be incorrect....
Thanks - Bob
Last edited by Bob's Garage; May 24th, 2007 at 06:22 AM.