Results 1 to 5 of 5

Thread: idle after restart

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Aug 2006
    Posts
    33

    Default idle after restart

    I'm struggling with how to approach this problem. The car seems to start and idle fine 650-750 RPM when it's cold. If you shut it down and fire it right back up it starts wierd. Initially around 500 RPM drops momentarily to high 300 RPM range, then settles out to 700. This is all in the matter of 10 seconds or less.

    I tried to follow the following post regarding the RAFIG process ... but it just didn't seem to work for me. I did not understand what I was looking at.
    http://forum.efilive.com/showthread....ighlight=rafig

    I have attached a log of what I think shows the problem. It should be a bunch of starting stopping of the motor (I'm not at my tuning PC so I can't verify), let me know if the log doesn't make sense ... I can post a new one later.
    Attached Files Attached Files

Similar Threads

  1. BBL Auto Restart After Entering "Power Saving" Mode?
    By swingtan in forum Black Box Logging
    Replies: 6
    Last Post: March 8th, 2011, 09:52 PM
  2. Car Wont Idle And Runs Rich At Idle ( Tune Inside)
    By mikeyayell in forum Gen III V8 Specific
    Replies: 13
    Last Post: January 8th, 2008, 04:17 PM
  3. Have to restart V2 frequently?
    By 2002_z28_six_speed in forum FlashScan V2 BB Logging
    Replies: 10
    Last Post: December 25th, 2007, 03:41 PM
  4. Car is in OL. Stall after I stop car and restart
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 5th, 2007, 09:50 AM
  5. Stock maf = perfect idle. Big maf = unstable idle. Any tuning suggestions?
    By onfire in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: July 11th, 2006, 03:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •