my mechanical gauge on my fuel rail reads 70psi.
i would like to know if that sounds about right
to anyone that has logged fuel pressure with the walbro 255.
please let me know what you ended up using for your IFR values.
i ask because at start up i see 72psi and,
after the car is warmed up i see 70psi and at RPM it gets hard to read,
it will bounce around 68-72psi or so.
i have used 68psi for my IFR values but i am wondering if it is best to
use average or minimum or maximum.
i am using stock fuel rails and injectors if that makes a difference.
thanks.