Results 1 to 10 of 10

Thread: New 2007 Z06 calibration

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default New 2007 Z06 calibration

    My Z has been in the shop a couple of times with a P0171 DTC (Fuel Trim System Lean bank 1). My (clever) tech figured out this was due to bent pins on the under hood fuse block connector that supplies bank 1 coil pack power; that bank was actually running very rich. Apparently my car was one of four that the boys back at the plant were trying to figure out (turns out my tech is a hero for solving two or more of them!)

    Anyway, I was poking around on http://calid.gm.com/ and noticed this: "New calibration with diagnostic enhancements for DTCs P0171, and P0174." (OS: 12614676) The [dealer] flashed my car with this today (after installing a new bank 1 [cat] and muffler -- the old one was full of pieces of the "compromised" cat). It looks like in addition to whatever diagnostic related changes were made, they also made minor tweaks to B4001 (Injector Flow Base) and B1213 (Injector Flow Modifier IAT).
    Last edited by leres; January 1st, 2008 at 07:33 AM. Reason: typo/missing words

Similar Threads

  1. Commodore 2007
    By odd boy in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: December 3rd, 2009, 12:35 PM
  2. E38 2007 ZO6 Map only Tunning
    By Lucas English in forum E37, E38 & E67 PFI ECM's
    Replies: 8
    Last Post: June 15th, 2009, 05:36 PM
  3. 2007 H2 can't get PE enrichment...
    By rubbersidedown in forum Gen III V8 Specific
    Replies: 3
    Last Post: October 14th, 2007, 05:21 AM
  4. 2007 Z06 Ls7
    By dgdyno in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: June 18th, 2007, 12:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •