Have a guy with a 06 6ltr thunder ute, he has had 60 # mototrons fitted for FI.
Looking at table B4001 in his tune (injector flow base) the EFI limit is only 7.999 g/sec and values up to 9.5 g/sec will be required to set up the table for the larger injectors !!

But if you change the units to imperial the limit is 100 lb/hr which is much higher then 7.999 in metric !!

So is there a bug in the operating system ?
and do we just revert to imperial on that table as a work around.


Cheers
John