Did my first logging run using the widebands today. In preparation I performed the following:

Disable LTFT
Set closed loop temp at upper limit
Forced octane scaler to 100%
Set DFCO enable speed at upper limit

During the logging runs, I noticed that STFT's were still hopping around. Is there something more I need to do to kill them?

After pasting in my BEN's and returning the above settings to normal, my LTFT's are trending a tad high. Not a lot, but enough to get my attention. I'm thinking maybe the STFT's were not allowing the widebands to read the true open loop AFR.