Results 1 to 6 of 6

Thread: New cable type should be setup

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. December 25th, 2007 #1
    Blacky
    Blacky is offline
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,517

    Default New cable type should be setup

    If you have upgraded your FlashScan V2 cable to use the new BBL firmware (V2.5.xx or later), please change your FlashScan V7 (or V7.5) Scan Tool Properties to connect to the new FlashScan HAPI cable type instead of the old FlashScan V2 USB cable type. And uncheck Scan all cable types.

    Setting this option will cause the EFILive V7 Scan and Tune software to attempt to communicate with the FlashScan device using the new V2.5 communications protocol first, instead of the older V2.4 (and earlier) protocol.

    See attached image.

    Regards
    Paul
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: FSHapiSetup.png  Views: 580  Size: 18.8 KB  ID: 2541  
    Before asking for help, please read this.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. How to build standalone cable setup to flash PCM outside of vehicle?
    By thunder550 in forum Gen III V8 Specific
    Replies: 7
    Last Post: December 15th, 2010, 05:05 AM
  2. EGT K type Thermocouple Probe
    By Beer99C5 in forum External A/D inputs
    Replies: 24
    Last Post: March 12th, 2009, 06:13 PM
  3. Really could do with some hand holding type help
    By stigmundfreud in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: June 30th, 2007, 12:13 AM
  4. What type of card does V2 take?
    By redhardsupra in forum FlashScan V2
    Replies: 4
    Last Post: March 28th, 2007, 08:29 AM
  5. DTC Type A/B/C, MIL Yes/No
    By Teutonic Speedracer in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: February 27th, 2006, 03:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules