Hopefully you guys can help me out.

Here's what I have:
A 95 Bonneville with a L36 (95+ n/a 3.8 ) running on a $5B ID (94-95 L67 supercharged 3.8 ). I've been tuning with TunerCATs and an Ostrich 1.0.

It runs good and I have been able to use my Actron cp9110 without issue.

I just bought the ALDU1 and CABL2 Combo from Moates.net to use with EFILive v4.

Right now I only have the trial version of v4..

When I plug in the ALDU1 to my laptop, it can see the interface.

When I plug in the ALDU1 to my OBD2 style plug, it connects but then it cannot see the interface.

I selected the correct vehicle that goes with my ID, and I set both the driver and the program to COM port 2. COM port 2 is also not in use by anything else.

EFILive v4 just dosen't seem to want to work with the ALDU1..

I do know of one other person that is using EFILive v4 with the same style pcm but they built their own interface with a max 232 chip..


Does anyone have suggestions?