Disconnect FlashScan.

When EFILive_Explorer is running, double click on the EFIlive_Hapi (EFILive Control Panel) in the task bar's system tray.

Select the Connections->Settings page. Make sure FlashScan is selected and AutoCal is not.

Select the Trace->settings page and check the Enable diagnostic tracing check box. Click [Apply].
Go back to the trace page.
Click [Clear].

Connect FlashScan.
Click [Refresh (F5)] on the Firmware tab page of EFILive_Explorer.

Go back to the Trace page in EFILive_Hapi and click on Save. Save the trace file and post it in this thread as an attachment (or just email it to me).

Note: Saving the trace file saves more data than is displayed on the screen.

Regards
Paul