You can raise the 50,000 frame limit in the Properties window on the Logging tab page.
I'll change the auto re-plot to be x1000 (the same as the frame limit in the Logging tab page). i.e. that will turn the 30,000 limit into 30,000,000.

Regards
Paul

Quote Originally Posted by swingtan View Post
Hi Guys,

I've performed 2 logs today that are over 50,000 frames long. Both load in ScanTool after fixing the PIDs and both are truncated at 50,000 frames. The scroll bar allows you to scroll past the end of the data in ScanTool, but the lines just stop at the 50,000 frame mark. The Metadata indicates that there are a lot more than 50,000 frames....

FRAMECOUNT=00092371
FRAMECOUNT=00057076

I've attached a screen shot to show the screen.

By the way, is there any chance we can get the "Auto Replot" limit raised? It seems to have an internal limit of 30,000.

Simon.