Results 1 to 8 of 8

Thread: Rich deceleration

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. January 9th, 2009 #1
    mr.prick
    mr.prick is offline
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,191

    Default Rich deceleration

    I am using Delphi 42lb fuel injectors @ 60psi
    and can not stop a rich condition under low TP% and below 30kPa MAP.
    it seems to be mostly related to TP% because i can open the
    throttle while @ 30kPa MAP or below and AFR will lean out.
    minimum IBPW is 1.7-/+
    i am attempting to get the injectors dialed in OLSD.
    any injector advice is welcome.
    here is what i have so far.
    Last edited by mr.prick; January 12th, 2010 at 10:23 AM.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2
    _________________________________________________
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. How Do You Achieve Zero Fuel Consumption On Deceleration?
    By neil in forum Tuning For Economy
    Replies: 51
    Last Post: November 6th, 2012, 09:16 PM
  2. Deceleration with A/C on
    By DaddySS in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: August 12th, 2007, 10:34 AM
  3. Deceleration and RPM holding in an A4
    By Jphdg in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: April 16th, 2006, 01:57 PM
  4. WOT afr too rich
    By BlownAlaskan in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 3rd, 2005, 06:08 PM
  5. Open loop on deceleration
    By hpcubed in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: April 14th, 2005, 05:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules