No ETC after upgrade

[curtbriggs]

Help>PCM Licensing> Commercial but No ETC table in Enginge Calibration.
I have Abuse, EGR, Engine Protection, Engine Torque, Idle etc. I've open every thing, no can find.

[bink]

Help>PCM Licensing> Commercial but No ETC table in Enginge Calibration.
I have Abuse, EGR, Engine Protection, Engine Torque, Idle etc. I've open every thing, no can find.

I think your cable needs to be plugged in to your computer/laptop.

Cheers,
joel

[curtbriggs]

Help>PCM Licensing> Commercial but No ETC table in Enginge Calibration.
I have Abuse, EGR, Engine Protection, Engine Torque, Idle etc. I've open every thing, no can find.

I think your cable needs to be plugged in to your computer/laptop.

Cheers,
joel

That was Instruction #1 on the instructions to upgrade list. And I attached the little black thingie to the end of it. :lol:

[Blacky]

The FlashScan cable must be connected prior to starting the Tuning Tool software.

So basically after you have upgraded it, you need to close the EFILive Tuning Software (which will still be under the personal license) and then restart it to activate the Commercial license.

Regards
Paul

[curtbriggs]

The FlashScan cable must be connected prior to starting the Tuning Tool software.

So basically after you have upgraded it, you need to close the EFILive Tuning Software (which will still be under the personal license) and then restart it to activate the Commercial license.

Regards
Paul

I had done that, so I thought I'd shut down the laptop, reattach the cable and the flashscan and restart the tune program. I couldn't open V7.3 Tune or Scan, some of the 7.3 files were dropped.
BTW, I sent you a email about 7.3, after I installed it, I read my PCM with it. However, all the information downloaded from the PCM is not what I flashed with V7.2.2.
The injector fuel flow rates are all 900.0000 Lbs/Hour, the engine starts and runs fine so these impossible to obtain readings are just that. I Read the PCM two times with the same results.
Torque management has changed from 639 to 472. Desired Idle Speeds are just slightly changed from a straight 950 to a sliding scale 1075 to 897.

[Dirk Diggler]

Sounds like you cal files are out of date. What version is your cal files the latest is 7.70

[curtbriggs]

Sounds like you cal files are out of date. What version is your cal files the latest is 7.70

Dirk are you still making Movies? I saw you in "Boogie Nights" last week. I like your style, but you were younger then. Heh, heh, heh,

I just finished reloading V7.3 again and it now loads. I'll have to read my PCM to see if ETC is there. As the navigator is blank.

How do you find the version of the cal files? I just down loaded V7.2.2 and V7.3. Calibrations, properties shows Oct 5. I know that not what you want. I just don't know how to get it.

I have a new Dell laptop which is much faster then the Sony I was using. It does some strange things. When in Explorer and high lighting folders, some times when you move the cursor in starts dragging the folder. Like the right click button is sticking, I've had folders disappear. I have to really watch what I'm doing.

[Blacky]

BTW, I sent you a email about 7.3, after I installed it, I read my PCM with it.

Hi Curt,
I meant to respond, sorry.

The cal files may be out of date. You should see V7.7 (or higher) dated October 04, 2005 (or later) in the "PCM Details" window when EFILive Tuning Tool first start up and a *.tun file is loaded.

There is also a file called "eng_units.txt" that should exist in the folder:
\Program Files\EFILive\V7\Calibrations
Does it exist? If so, try renaming it to x.txt and restart EFILive. That way EFILive will work from it's internal eng_units data instead of the contents of that file - which may be damaged.

Also, can you please send me your *.tun file that shows the 900 for the IFR.

Regards
Paul

[Black02SS]

Dirk are you still making Movies? I saw you in "Boogie Nights" last week. I like your style, but you were younger then. Heh, heh, heh,

Thats great!!! Sorry to hijack your thread but that is funny.

[Ira]

I have a new Dell laptop which is much faster then the Sony I was using. It does some strange things. When in Explorer and high lighting folders, some times when you move the cursor in starts dragging the folder. Like the right click button is sticking, I've had folders disappear. I have to really watch what I'm doing.

Go to control panel/mouse and turn off "tap and drag" and click by tapping. Those drive me crazy too until I turn them off.

Ira