I'm sure I've read this being done on here but cannot find the post?
If I wanted to program the psuedu NB output of an LC-1 to switch slightly leaner than stoich.
At my last test I had tailpipe lambda 1.006 (limits 0.97-1.03)
From the programmer text
1.1V = 0.958 lambda (richer than stoich)
0.103 = 1.022 lambda (leaner than stoich)
0.97V = 0.064 difference between upper and lower limit
0.064V = 0.01 lambda
If I program the LC-1 as below would this work?
1.036V = 0.958
0.039V = 1.022