I'm running SD mode and I want to use the idle, base...etc estimates in efi live to estimate what spark i should be running at rpm vs gram/cyl
can you make a .map of this and have it show you, or do you have to guess based on that it shows you.
I'm running SD mode and I want to use the idle, base...etc estimates in efi live to estimate what spark i should be running at rpm vs gram/cyl
can you make a .map of this and have it show you, or do you have to guess based on that it shows you.
01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
[Quote :ur car is sneezing!!!!]
I KNOW KUNG FU.
My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
453HP 475TQ @6psi
.....CAM'd, IC'd, and 7psi'd #'s coming.....
You can make maps of whatever PIDs you like. If a PID exists that shows the value looked up by the PCM from a given table then yes you can do what you want.
Look at all the PIDs under "Spark", in the System drop down list box on the [PIDs (F8)] tab page.
The ones that are listed as GM.EST_xxxx_DMA are the ones you are interested in. Right click on them and select "More info...". If that PID has a relationship with a table in the PCM, then it will be displayed in the "More info..." screen.
For example {GM.EST_ECT_DMA} is controlled by calibrations:{B5910} and {B5956}.
Regards
Paul
Before asking for help, please read this.
I got the spark tables to work and I created a MAP for it
I want to get my spark tables in line now what i did was create the same row and column as the actual spark tables read.
then for the data i did Run spark under the pid's
should i be using something other than run spark or is that right?
01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
[Quote :ur car is sneezing!!!!]
I KNOW KUNG FU.
My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
453HP 475TQ @6psi
.....CAM'd, IC'd, and 7psi'd #'s coming.....
I take it that I'm doing that right....the values that i'm getting are close to what i had programmedOriginally Posted by ZL1Killa
01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
[Quote :ur car is sneezing!!!!]
I KNOW KUNG FU.
My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
453HP 475TQ @6psi
.....CAM'd, IC'd, and 7psi'd #'s coming.....
lol everyone is getting ready for sema..yall better show them all up there!!
good luck with whatever demo's or new things yall are getting ready to reveal!!
01 T/A WS6 #4984 STOCK 342HP and 352TQ [/b]MODS:Too many to list, PM...funny rear mount.. father/son build.
[Quote :ur car is sneezing!!!!]
I KNOW KUNG FU.
My STS build: http://www.ls1tech.com/forums/showthread.php?t=631954
453HP 475TQ @6psi
.....CAM'd, IC'd, and 7psi'd #'s coming.....
Run Spark is fine, which is basically the same as {SAE.SPARKADV}, the benifit of using {SAE.SPARKADV} is tha tit only uses 1 channel in the data log, {GM.EST_RUN_DMA} wastefully uses 2 channels.
We're back from SEMA, a great time was had. All I can say is bling, bling and more bling!!!!!!!!! And just how many wheels and tires does one person need?
Paul
Before asking for help, please read this.