Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Anybody run a tranny brake?

  1. #11
    Member
    Join Date
    Dec 2008
    Posts
    67

    Default

    Well you can feel the brake engage, but the band doesnt hold tight enough. Modifying/testing again tomorrow.

  2. #12
    Member
    Join Date
    Dec 2008
    Posts
    67

    Default

    HOLY SHEEET! This brake locks in/releases faster than any other Automatic 4L80 brake on the market!!!!! Havent compared the manual brakes, but it does work with manual setup too.

  3. #13
    Member
    Join Date
    Dec 2008
    Posts
    67

    Default

    http://www.youtube.com/watch?v=MZBZOamnh1E

    Keep in mind we forgot to command max line pressure (it setup slower because of this) and we were commanding the solenoids thru the HPTuners (boooooo! I am saving up for EFILive as we speak ) scanner....on a direct switch and max line pressure it will setup and release even faster.....

    Oh and the car is slow to react since its just blowing the street tires off
    Last edited by slow67; February 28th, 2010 at 04:12 PM.

  4. #14
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,400

    Default

    Thanks for the vid...

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Brake downshift
    By L31Sleeper in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 11
    Last Post: February 18th, 2010, 05:31 PM
  2. LBZ Turbo brake
    By amhobby in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: January 21st, 2010, 05:28 AM
  3. Turbo brake
    By maxxflip in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 0
    Last Post: October 9th, 2009, 10:39 AM
  4. cos 5 with trans brake and n2o
    By minytrker in forum Custom Operating Systems
    Replies: 1
    Last Post: March 7th, 2007, 05:14 AM
  5. Brake Torque Management?
    By trudynosports in forum Gen IV V8 Specific
    Replies: 10
    Last Post: February 28th, 2007, 10:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •