i take that back truck starts to read on alt keys but stops after 24kn frezes up
i take that back truck starts to read on alt keys but stops after 24kn frezes up
EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,
it doesnt say anythign...just completly stops reading after 24-28k even if i let it sit for 10min wont finish reading
EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,
Can you please check for debug files (BLX) as described here (http://www.efilive.com/index.php?opt...111&Itemid=121) and email them to me at support@efilive.com?
Andrew
EFILive Crew
bug file sent from browneflatwork
EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,
First up it looks like your software and firmware versions are not in line (you're running 7.5.6 software with the older 2.06.12 firmware).
Can you please update everything from this thread (http://www.efilive.com/index.php?opt...=48&Itemid=133) and try again. After all these updates you should have versions 7.5.6 Build 109, 8.1.2 Build 89 and FlashScan V2 firmware 2.06.30.
Andrew
EFILive Crew
updated everything will try to read truck again shortly thanks
EFI....SC IV,fass 150,sleeves, MBRP 4in TB,afe intake, shimmed rail, blocked egr,auto meter c2 gauges, home built trac bars,