options request : post your ideas

[5.7ute]

How about delta airmass control in the DVT's ?
I was thinking about this last night & thought how easy it would make dialling in idle for those without a RR.

[joecar]

Pids for the following:
- indication of where airmass is coming from (VE or MAF).
- value of CL Mode {B4107}.

[mr.prick]

#Units         Low      High     Fmt    Expression
#------------ ---------- ----------- -------- --------------------------------------------------------------
*CLC-00-001
None              0        64          .0        "Lookup({SAE.MAF.gps}, 0,0, 4,4, 8,12, 12,30, 16,36, 20,40, 24,44, 28,50, 32,54, 36,54, 40,54, 44,54, 48,54, 52,54, 56,56, 60,64, 64,64, 68,64, 72,64, 76,64, 80,64, 84,64, 88,64, 92,64, 96,64, 100,64, 104,64, 108,64, 112,64,116,64,120,64,124,64, 128,64, 132,64, 136,64, 140,64, 144,64, 148,64, 152,64, 156,64, 160,64, 164,64, 168,64, 172,64, 176,64, 180,64, 184,64, 188,64, 192,64, 196,64, 200,64, 204,64, 208,64, 212,64, 216,64, 220,64, 224,64, 228,64, 232,64, 236,64, 240,64, 244,64, 248,64, 252,64, 256,64, 260,64, 264,64, 268,64, 272,64, 276,64, 280,64, 284,64, 288,64, 292,64, 296,64, 300,64, 304,64, 308,64, 312,64, 316,64, 320,64)"
None              0        64          .0        "Lookup({SAE.MAF.lbpm}, 0.00,0, 0.53,4, 1.06,12, 1.59,30, 2.12,36, 2.65,40, 3.17,44, 3.70,50, 4.23,54, 4.76,54, 5.29,54, 5.82,54, 6.35,54, 6.88,54, 7.41,56, 7.94,64, 8.47,64, 8.99,64, 9.52,64, 10.05,64, 10.58,64, 11.11,64, 11.64,64, 12.17,64, 12.70,64, 13.23,64, 13.76,64, 14.29,64, 14.82,64, 15.34,64, 15.87,64, 16.40,64, 16.93,64, 17.46,64, 17.99,64, 18.52,64, 19.05,64, 19.58,64, 20.11,64, 20.64,64, 21.16,64, 21.69,64, 22.22,64, 22.75,64, 23.28,64, 23.81,64, 24.34,64, 24.87,64, 25.40,64, 25.93,64, 26.46,64, 26.98,64, 27.51,64, 28.04,64, 28.57,64, 29.10,64, 29.63,64, 30.16,64, 30.69,64, 31.22,64, 31.75,64, 32.28,64, 32.80,64, 33.33,64, 33.86,64, 34.39,64, 34.92,64, 35.45,64, 35.98,64, 36.51,64, 37.04,64, 37.57,64, 38.10,64, 38.62,64, 39.15,64, 39.68,64, 40.21,64, 40.74,64, 41.27,64, 41.80,64, 42.33,64)"
==============================================================================================================
#Code                                  PRN         SLOT            Units          System                Description
#--------------------------------- ----------- ------------------- --------------- -------------------- -----------------------------------
CALC.CLMODE                  F001     CLC-00-001       None              Air               "Closed Loop Mode" 

[joecar]

Yes, I was considering that... but it would have to be edited for each calibration that had a different set of values.

[mr.prick]

How about the ability the selectively highlight multiple cells, columns & rows in both the
scan and tune tools by holding the ctrl key?

I've asked about this before
and I still think it's a must have.

[Aloicious]

How about the ability the selectively highlight multiple cells, columns & rows in both the
scan and tune tools by holding the ctrl key?

I've asked about this before
and I still think it's a must have.

I think it would be useful as well.

OT, That dead horse animation is a bit disturbing. , I mean, look at where he's hitting the horse

[mr.prick]

With as many times as I've asked for this,
where else would you hit the horse?

[Blacky]

How about the ability the selectively highlight multiple cells, columns & rows in both the
scan and tune tools by holding the ctrl key?

I've asked about this before
and I still think it's a must have.

It will be done. And now you're going to ask when. And I'm going to say I don't have a date for that mod yet. But it probably won't happen in the V7 software, it will definitely be in the V8 software.

Regards
Paul

[mr.prick]

Dare I ask when the V8 software will be released?

[Blacky]

Dare I ask when the V8 software will be released?

People who ask when V8 is ready-><-Me
Me-><-People who ask when V8 is ready

So sure, go ahead and ask

Regards
Paul