Results 1 to 6 of 6

Thread: Throttle body bump stop

  1. #1
    Senior Member
    Join Date
    Apr 2010
    Posts
    171

    Default Throttle body bump stop

    Hi all, sorry if this is irrelevant but I wanted to know if there is an adverse affect to this.

    m sure you have all heard that LS1 throttle bodies dont open to 90 deg and that people trim the bump stops. Im curious to the side effects ???
    In data logging the scan tool knows the throttle is 100% open, wouldn't the bump stop mod push it over the edge???

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Do you see less that 100%?
    I milled mine slightly and still see no ill effects but it probably wasn't necessary.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Junior Member Frost's Avatar
    Join Date
    Nov 2009
    Posts
    44

    Default

    Be careful though... if WOT VDC goes over something like 4.75V, you will set a TPS code (high voltage) and the car will fall right out of PE at WOT (not good!).
    Steve Williams

  4. #4
    New Member
    Join Date
    Apr 2010
    Posts
    9

    Default

    Quote Originally Posted by Frost View Post
    Be careful though... if WOT VDC goes over something like 4.75V, you will set a TPS code (high voltage) and the car will fall right out of PE at WOT (not good!).


    Good info Frost

  5. #5
    Senior Member
    Join Date
    Apr 2010
    Posts
    171

    Default

    yeah thats what I heard about the voltage thing, but my scan from a drive shows 100% throttle at WOT, so the PCM knows it at full so if i trim it a bit, it doent change this as it cant go above 100% but does physically allow the throttle to open a bit more at 90 deg rather than 85* as long as it doesnt go past 4.75 V

  6. #6
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    You might need to mill of a good bit to get exactly 90°
    I removed 0.065" (1.65mm)
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

Similar Threads

  1. Throttle body set screw
    By 99STEPSIDE in forum Gen III V8 Specific
    Replies: 7
    Last Post: August 8th, 2009, 05:30 AM
  2. Throttle Body Area Scalar
    By finishline in forum Gen IV V8 Specific
    Replies: 0
    Last Post: August 24th, 2007, 01:05 PM
  3. How is a larger throttle body accounted for?
    By 2000ssnb in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 14th, 2005, 02:00 AM
  4. Paul, Throttle body scaler.
    By jfpilla in forum General (Petrol, Gas, Ethanol)
    Replies: 16
    Last Post: August 22nd, 2005, 02:28 PM
  5. Electronic throttle control conversion for the F-Body?
    By leres in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: July 23rd, 2005, 07:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •