Any thoughts on this? What do I need to do to Correct? Was at the track last nightand counldn't log anything???
Any thoughts on this? What do I need to do to Correct? Was at the track last nightand counldn't log anything???
06 LBZ CCSB
A few bolt on's!
Have you validated all PIDs?
Sometimes PIDs will be invalid until you start logging.
Select your PIDs then start a log, see what happens.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Yes I did.( I think I did) I thought the same thing? Started to log and they came up N/A.
Explain Validate PID's thx
Last edited by Tarkstoys; May 9th, 2010 at 04:09 AM.
06 LBZ CCSB
A few bolt on's!
Scan tool> connect to PCM> Shit+F2
Page 48 of the scan tool manual:
Validate PIDs
Will query the connected vehicle to determine which PIDs are supported and which are not.
Unsupported PIDs are marked with a cross through their icon on the [OBD II (F7)] tab page [PIDs] sub page.
Passthru or BBL?
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
I validated the pids and worked until I hooked up the V@ to the truck and connected. It said I needed to update the software whichwas done 10 minutes ago???? Passthru
06 LBZ CCSB
A few bolt on's!
Did you select the pids then start a log?
If it gives an error, ignore it and select the pids anyway.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Uninstalled everything and will try again. Thx for the help and with it being Mothers Day I'm in and out.
Thanks again!!!
06 LBZ CCSB
A few bolt on's!