Just wondering how to do this? click case learn button in efi live then rev to what? 2500? then it misfires or something like that and your ment to turn car off for 15 seconds
Just wondering how to do this? click case learn button in efi live then rev to what? 2500? then it misfires or something like that and your ment to turn car off for 15 seconds
Scan Tool user manual - read pages 152 & 153 for instructions on Crank Position Sensor Relearn
Regards,
Taz
Yes, bring rpm above 4000 within 10 seconds, engine will stumble for a moment, allow to spin down to idle, turn off for 15 seconds.
Manual indicates conditions that must be met as Taz indicated above.
I never got a user manual with mine i don't think nothing 150 pages?? where is that from?
open up the scan tool click on help, then click on help contents. it opens a pdf manual
03 Silverado 5.3 ECSB 4x4 Z71
Comp Cam 206/212 .515/.522 112 lSA, hardened rods with LS9 springs
2010 Tahoe VVT AFM 5.3
Stock for now
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Manuals and Tutorials were probably downloaded to C:\Program Files\EFILive\V7.5\Doc\Tutorials - there should be a about a dozen *.pdf files.
When I first started with EFILive I printed these out, and organized them in a binder - it's about 6 inches thick !! I still use it frequently ... also worthwhile to invest the time in reading them all ... just to fully understand the scope of the software.
Regards,
Taz
The scantool and tunetool user manuals are must-reads if you want to be able to use the tools to their best ability.
The tutorials are very good reads because they indicate certain table relationships/interactions that a person might have not pick up on in the forum.