I thought more simply it may have just been a deceased Polish person.
I thought more simply it may have just been a deceased Polish person.
Andrew
EFILive Crew
Hi Paul,
Im having troubles with connecting to the vehicle with the logger, takes about 3-4 mins, once connected the logger pauses and drops out, this occured ever since the bootblock/firmware update V2.07.01, i have an old FS with the early firmware/bootblock and it works fine. Any suggestions?
After the scan tool software has connected, select the menu option File->Generate error report. Save the report and email it to me at paul@efilive.com.
One thing to try is for FlashScan devices with firmware V2.05.xx or later, in the Scan Tool property window, change the settings to those shown in the image. Make sure you select the V2.5 (HAPI) option and uncheck the "Scan all cables" checkbox.
For FlashSCan devices with V2.04.xx or earlier firmware select the V2 (USB) option.
Regards
Paul
Before asking for help, please read this.
Doesn't connect to any LS1 holden cars, I tried on three different cars. But work on the rest okay.
Here is the bug I got from the scanner, might help u.
doesn't want to communicate.txt
Regards,
Odd Boy
I trust you have set the cable selection up as per the screenshot in Blacky's post #13?
Andrew
EFILive Crew
Mine wasn't set to V2.5 HAPI so im hoping it will work next car i see.
Oztrack
EFILive Tuning Consultant
Worldwide Remote Tuning Service
2006 NSW Super Street Drag Racing Champion
www.oztrack.com.au
What is the outlook on BBx Full Flash ??
Problem still exists, selecting HAPI and unchecking "Scan all cables" have not resolved the issue.
Please help, I am loosing a lot of customers.
Regards,
Odd Boy