Hi All!
I'm new to the forum and tuning. I've been reading up on everything for a while and have just starting tuning my 2000 T/A. Just wanted someone to take a look at my Calc VE table to ensure I'm not doing anything stupid.
Also had a couple of questions concerning the Calc VE tuning process:
1. Should I be looking to fill every cell with data to remap the entire VE table or just below 4k rpm (the VE/MAF blend rpm threshold I believe)?
2. The Calc VE tuturial doesn't really address the use of a wideband (LC-1 in my case). What should be done differently when using a wideband vs just relying on the narrow O2's?
3. It seems to me that you would be better off calibrating the MAF with the wideband before you should try this method, otherwise wouldn't you be skewing the data with a MAF that isn't dialed in?
Sorry if any of these questions are way off base... still trying to get a handle on all the new terminology and tuning in general.
Thanks for all the help!
Brad