options request : post your ideas

[5.7ute]

I would like a way to group calibration tables to a user defined section. Similar to how you can group selected tables to the favourites tab.
For instance you could name a group "exhaust" & place in this group all the tables you modify when changing an exhaust system. This way you dont need to trawl through the tree to get to the pertinant tables for something where a script is of no real use.

[macca_779]

I would like a way to group calibration tables to a user defined section. Similar to how you can group selected tables to the favourites tab.
For instance you could name a group "exhaust" & place in this group all the tables you modify when changing an exhaust system. This way you dont need to trawl through the tree to get to the pertinant tables for something where a script is of no real use.

Now that's a really good idea right there. I too would really appreciate something like this.

[joecar]

You mean like multiple favourite lists (with each list being able to be renamed)...?

[Alex99]

Is there any plan on implementing a variable TCC enable temp function for GEN3 auto transmissions?

[5.7ute]

You mean like multiple favourite lists (with each list being able to be renamed)...?

Yes.

[mr.prick]

How about more maps in the maps tab.
The map bar can easily fit A-Z instead of A-J.

[joecar]

+1 more maps.

[Biggsy]

When BB logging (just displaying live data ie. not recording), I would like to be able to have every PID available when scrolling down through the live data without it going slow.
Have it where the V2 only commands the ECM to stream data of what PID's are currently displayed. So, as you scroll down, the next PID is commanded and displayed and the PID that dissappeared off the top of screen is no longer commanded. This would allow me to have a PID group that has more than 24 channels selected, and no restrictions on data speed. Also, maybe have a button on the V2 that can be pressed that will record current displayed data.

You could do a similar thing on dashboards in V7/8. Have several dashboards, and, as you flick between them, a new PID list automatically gets streamed from the ECM.

I hope I explained it correctly (compared to what is in my head)!

Cheers,

[joecar]

When BB logging (just displaying live data ie. not recording), I would like to be able to have every PID available when scrolling down through the live data without it going slow.
Have it where the V2 only commands the ECM to stream data of what PID's are currently displayed. So, as you scroll down, the next PID is commanded and displayed and the PID that dissappeared off the top of screen is no longer commanded. This would allow me to have a PID group that has more than 24 channels selected, and no restrictions on data speed. Also, maybe have a button on the V2 that can be pressed that will record current displayed data.

You could do a similar thing on dashboards in V7/8. Have several dashboards, and, as you flick between them, a new PID list automatically gets streamed from the ECM.

I hope I explained it correctly (compared to what is in my head)!

Cheers,

Dave,

+1... I like that idea.

That is similar to what some scantools like the Genysis/Nemysis do... all pids are being logged, the ones visible on the screen are updated at high priority, the ones not visible on the screen are updated at low priority, and you can dynamically scroll/page up/down thru a long list of pids; it also allows you to move individual pids relatively up/down so that you can group pids together on the screen.

This allows all pids to be quickly viewed when I have no idea what I'm looking for when troubleshooting.

[Biggsy]

it also allows you to move individual pids relatively up/down so that you can group pids together on the screen..

I wanted that too, but couldnt think how to explain it!

Your reason for wanting this is the same as mine, you dont always know what PID you want.

Cheers,