Can you flash/read LMM trucks standalone now?
Can you flash/read LMM trucks standalone now?
2011 Chevy 2500HD LML 4x4 LTZ-Black
-H&S Mini Maxx | MBRP 5" w/Muffler | 4" Rancho Lift | BMF REPR 20x9 DM | Mickey Thompson ATZ P3's 35/12.50's.
2012 VW Jetta TDI - Daily Driver.
SOLD - 06 LBZ
EcoDieselRam Forum
You can definitely read with BBR now. The write bootloaders are included in the latest builds (in the latest pre-release versions). So it "should" work with both V8 pass-thru and V2 BBF. Please let us know if you have issues.
Andrew
EFILive Crew
I didn't successfully flash with the latest software, I could only read with BBX. Pass thru VIA V8 software worked fine for both read and flash..
I did program for the scripts to update, maybe it missed the flash script.
2011 Chevy 2500HD LML 4x4 LTZ-Black
-H&S Mini Maxx | MBRP 5" w/Muffler | 4" Rancho Lift | BMF REPR 20x9 DM | Mickey Thompson ATZ P3's 35/12.50's.
2012 VW Jetta TDI - Daily Driver.
SOLD - 06 LBZ
EcoDieselRam Forum
What error did you get with BBF?
Andrew
EFILive Crew
2011 Chevy 2500HD LML 4x4 LTZ-Black
-H&S Mini Maxx | MBRP 5" w/Muffler | 4" Rancho Lift | BMF REPR 20x9 DM | Mickey Thompson ATZ P3's 35/12.50's.
2012 VW Jetta TDI - Daily Driver.
SOLD - 06 LBZ
EcoDieselRam Forum
I've asked Paul or Ross to try BBF on an LMM (I don't have one handy ATM). I'll let you know when I get a response.
Andrew
EFILive Crew
2011 Chevy 2500HD LML 4x4 LTZ-Black
-H&S Mini Maxx | MBRP 5" w/Muffler | 4" Rancho Lift | BMF REPR 20x9 DM | Mickey Thompson ATZ P3's 35/12.50's.
2012 VW Jetta TDI - Daily Driver.
SOLD - 06 LBZ
EcoDieselRam Forum
Unlikely. The only effect a user really has on a process like that is pressing the button and there's not much room for error there
Andrew
EFILive Crew
I just read and flashed an LMM using BBR/BBF, it worked perfectly.
Once thing that may be causing the problem is that we changed the code of the MM from "LMM" to "E35B" which is a more accurate controller designation.
In the BBx setup screen, you may need to double click each of the entries that refer to the LMM (and/or LBZ,LLY and LB7) controllers and make sure the correct controller type is selected for each of those controllers.
That will ensure the correct supporting files are transferred to the FlashScan/AutoCal device when you click [Program].
I also recommend formatting the Config file system (using the drop down selections on the [Program] button prior to programming the support files into FlashScan/AutoCal. That will remove any non-essential or out of date files.
FYI, these are the controller designation changes:
LB7 -> E54
LLY -> E60
LBZ -> E35A
LMM -> E35B
LML -> E86
Regards
Paul
Before asking for help, please read this.