Cummins development progresses

[Jay]

Awesome !! Ya I've had a V2 since September of 2008 and LOVED IT!! and I do have a friend that has a teck 2 thats available at any time, but as far as Dodge's... I don't have any way to recover them if anything went terribly wrong.

Well I would like to get a hold of that Dodge tuning software as soon as its safe!!
Keep up the GOOD WORK!!

[Dmaxink]

The initial beta phase will be conducted with existing customers who are already intimately familiar with the EFILive products and processes. This decision is intended to ensure that product familiarity do not cause unnecessary issues for either the user or EFILive as we try to progress through the beta phase. Additionally we ideally wish for the beta participants to have the ability to recover the Cummins ECM with other tools should a problem be identified, it is beta afterall. For this reason individuals (personal users) will generally not be considered due to the potential for issues.

On the licensing front. Our licensing model is to change shortly to align with the changes that supporting multiple manufacturers brings. When Cummins support is released customers will be able to purchase the 'Dodge Cummins Diesel Tuning Add-On' which will cost US$399. There will also be a 'GM Tuning Add-On' product to cover the existing GM support, also priced at US$399.

Existing customers FlashScan V2 cables already include the 'GM Tuning Add-On' because that's all we support right now. New customers will have the option to choose which (or both) tuning support they wish to activate on the FlashScan v2 interface.

Cheers,

How about stream? I will be purchasing a stream right away...this is great news! Thanks for the update

[wiseguy63]

is there any hope for us who own a 99 model 24v haha or should i just stick to the tst smarty stack that i have now?

[wiseguy63]

any hope for efi live in a year or so for 98.5 - 2002 models?

[dansdieselp]

No streams for the Cummins just vin licenses.

VP44 guys there are no intentions of supporting vehicles that are getting to be that old.

[wiseguy63]

haha i didnt think so thank you for answering. anythin lookin good for the 04.5 models one of my friends has one and he was wondering

[johnyb59]

Planned Vehicle Support

1. 06-07 5.9L CAN based vehicles - expected public release March 2011
2. 07-09 6.7L CAN based vehicles (ECM and TCM support) - development will commence after 06-07 public release
3. 09-11 6.7L CAN based vehicles - development may or may not be concurrent to 07-09 vehicles.
4. 03-05 5.9L SCI based vehicles - will commence development after all CAN support is finalised.
5. Pre 2003 trucks will not be considered at this point of time

Time frames for support are dependent on the beta progress of the preceding controller.

[GMPX]

Just a quick update, the scantool is still being worked on. Paul has locked himself away in a dark room with no phones or human contact!!, we hope that by next week the beta testers will have scantool to play with.
We've had a bunch of ECM reads sent in too, the good thing there is only one of them was an ECM Operating System we hadn't seen before, so it looks like majority of peoples trucks will be supported from day one.

Cheers,
Ross

[pavetim]

Can you start scanning Cummins yet? and do you need a special cable or does the V2 GM cable work?

[ScarabEpic22]

Can you start scanning Cummins yet? and do you need a special cable or does the V2 GM cable work?

You can read the Cummins ECM out, but the general public cannot view/edit/flash tunes yet and the scantool is still being worked on. The regular V2 will work with all CAN based Cummins,.