Results 1 to 10 of 741

Thread: Calc.VET: correcting MAF and calculating VE (in single log)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. April 9th, 2011 #11
    Steve O
    Steve O is offline
    New Member Steve O's Avatar
    Join Date
    Feb 2011
    Posts
    5

    Default

    Thought I would attach a copy of my calcpid.txt file for those that do not have GM.DYNAIRTMP.DMA in their OS. This file includes the calc.dynairtmp.pid as an alternative. Please review this and note any required changes or suggestions.

    calc_pids.txt

    Also attached is a list of my PID selections from the scan tool when using calc.dynairtmp. Couldn't figure out how to capture the screen shot and post. Will work on that tomorrow.

    Steve O
    Last edited by Steve O; April 9th, 2011 at 02:41 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Please explain table A0007 TPS VE TABLE cos5
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: March 18th, 2008, 06:26 PM
  2. OLFA table vs. Custom OS A0008 table
    By 1bar in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: January 6th, 2007, 06:25 AM
  3. Table Names vs Table Number
    By lplott in forum Custom Operating Systems
    Replies: 0
    Last Post: May 17th, 2006, 05:14 AM
  4. Main VE Table ?, Logged data vs VE Table
    By dbaxter_ss in forum Tips and tricks
    Replies: 1
    Last Post: December 26th, 2004, 03:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules