Ok guys, I am following the CalcVe tuning tutorial every thing is going well but need some help understanding what is happening with the tune when the logged data is applied.

Is it fair to say?

-In the MAF table - If the logged bens are low say .97 in order to go to the ideal 1.0 Do the values in the tune need to go down in values? Also lower values equal leaner fueling.

-The MAF table is more important to be spot on than the VE table.

- In the VE table when the values go lower makes the LTFT more positive?

Just trying to get a better understanding of what is happening in the tune when the log is applied. So set me strait.

Thanks
Jorge