question on custom os 0202005

[joecar]

I understand that Joe but where do i view this to make the changes.

as you said in your email you changed a0001 from 1600 to 99
In mine it was set to 100.And all i saw was 100.Im sorry im just not understanding.Where am i not looking to see what everyone else is seeing.

Yes, I saw it being 100 (what the tunetool displayed, the real value was 1600); so I changed it to 99 (less than max display value); I changed all of the OOR's; saved file; exited tunetool;

then, if you really wanted 100, reopen file, change 99 to 100 (now, 100 is really 100 and not 1600); change all the ones you changed; save file.

Tricky.

[AllOutPerformance]

Ok i awnsered my own question lol in a eralier post.So you have to change it regaurdless if the values are the correct values that your going to use.Thanks for the help.Atleast i dont feel like a complete idiot now lol.

[AllOutPerformance]

Silly.but now i know.Thanks again for the input.Now i can get it finished up.

[joecar]

Ok i awnsered my own question lol in a eralier post.So you have to change it regaurdless if the values are the correct values that your going to use.Thanks for the help.Atleast i dont feel like a complete idiot now lol.

Yes, if it has blue dogear corners, it is OOR, you have to change it, save file, exit tunetool.

[joecar]

Let us know if it pulls timing on switch trigger.

[AllOutPerformance]

Ill let ya know tomorrow Joe.Thanks again for all the help sorry for the noob questions.

[joecar]

No worries... OOR's are tricky.

[joecar]

Here is a photo in case anyone finds it useful:
High Resolution Photo Red Pin 56:

Hi TFZ,

Thanks for the pic

Note that the file in your sig has some OOR's:

EFILive Custom Calibrations
{A0000} Forced Octane Scaler, was out of range when loaded.
{A0001} Forced Octane Scaler Percentage, was out of range when loaded.
{A0002} Octane Scaler Limiter, was out of range when loaded.
{A0017} N20 Monitor VE Multiplier Table RPM Enable, was out of range when loaded.
{A0018} N20 Monitor VE Multiplier Table MAP Enable, was out of range when loaded.

and also A0012, A0013 (set these last two to 511 since 512 appears to be OOR).

[joecar]

...

Dang, Joe and Andrew beat me to it. Again.

Yeah, we have armies of robot slaves who transcribe dictation into thread/post replies...

[joecar]

I wish...