Before asking for help, please read this.
Have you read through this tutorial?
http://download.efilive.com/Tutorial...20Tutorial.pdf
There are a few things about creating/saving dash boards and dash pages that can get confusing. The document attempts to explain how it works.
Regards
Paul
Before asking for help, please read this.
Can you send me the file with the bad checksum?
Is it a file you read from your truck?
Did you read it (or edit it) using an older version of EFILive?
Send it to paul@efilive.com
Before asking for help, please read this.
One thing that can make things confusing once you start moving away from the default dashboards is that the current pid file name (as shown in the [PIDs (F8)] tab page, is used to determine which dashboard to open.
I.e. if your PID filename is "E38Dyno.pid", then when EFILive is started, it will try to load a dashboard called E39Dyno.vdb.
Also in the Edit->Properties window on the [Startup] tab page you can override everything and specify exactly which dashboard (and PID file) you want loaded at startup regardless of any other setting or what was most recently used.
Regards
Paul
Before asking for help, please read this.
This new update is driving me insane. I can't do anything. Freezes constantly. I've reinstalled it probably 15 times. I have tried to go to the USB Manager and when I slick on it, it says that the shortcut has been changed or moved, so it will no longer work properly. Then asks if I'd like to delete it.
How am I supposed to change the USB Driver if I can't even open up the shortcut? Hmmm....
If you ware using Vista or Win7, after downloading the latest V7.5 and V8 installation executables, right click on them and select "Run as Administrator".
If the installation was successful, the USB Manager program will be installed here:
\Program Files\EFILive\Drivers\Utilities\EFILive_USBManager .exe (on Windows 32 bit machines)
\Program Files (x86)\EFILive\Drivers\Utilities\EFILive_USBManager .exe (on Windows 64 bit machines)
Can you verify that the EFILive_USBManager.exe program exists in the appropriate location on your machine after the install is complete?
Regards
Paul
Before asking for help, please read this.
I have been having some problems with the 2 latest versions of software. with v 7 build 165 and 167 the dtc control does not work on an 6 l l y with the bosch ecm. I have turned off the codes for the boost control solenoid and the boost sensor and the intake air heater but they keep setting causing the engine to go into limp mode. this stuff worked before as I have deleted intake air heater grids before by turning the codes off and it worked. I started a thread in the lbz/lmm section with more info
I just updated and cant read a few of my e67 files, it is coming up as bad files. I just worked on these files and everything was fine then I updated.