Can no loner find PID's

[acric5]

Ive done the connect and validate, along with vin number, I removed the .vpl file before validating and then verified a new one was created.
error during connection: ............firmware is not compatible with installed EFILive software. ...........

the parameter for the 2002 C5 are still not complete.

thanks for your attention to this problem,

[ScarabEpic22]

Dave, start by updating to the latest software found HERE. Remember you need both V7.5 and V8, update the firmware on your V2 after you get the new software installed. Do not use the automatic update function for this, it has been causing weird issues lately.

That error means you there is a discrepancy between the software on your PC and what firmware you have on your V2.

[acric5]

thanks for your kind reply,
id rather jump off a cliff.

[joecar]

...
id rather jump off a cliff.

Huh...!?! If it's that bad, then pm me your phone number.


Install V7 and V8 from where ScarabEpic22/Erik said...

connect your V2 to your PC, then start EFILive Explorer, goto the Firmware tab, first program in the bootblock, then program in the firmware.

[acric5]

reinstalled 7.5 from the old CD, and we are good to go.

[ScarabEpic22]

How old of a CD? What software version are you running now? I would try to update to the latest stuff again, not sure exactly whats going on but there are new things added to V8 (which I dont believe you can actually get on a CD yet) that can really affect your FlashScan V2. Especially when using the standalone features.

[acric5]

CD version 7.5.72 , splash screen says 2009
I noticed that the controller in the earlier version is called Gen III LS1 99-08, and is changed to LS1B, perhaps the error comes from naming.

we all know what Einstein's definition of Insanity is.

[joecar]

Ok, which V7/V8 build versions did you have installed when the problem was present...?

[acric5]

this is the current link, I used it yesterday.

[joecar]

Did you flash bootblock 2.07.02 and firmware 2.07.14 into your V2...?