Results 1 to 5 of 5

Thread: shift solenoids not working till commanded

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. August 27th, 2011 #3
    SimpleManLance
    SimpleManLance is offline
    Junior Member
    Join Date
    Dec 2007
    Posts
    29

    Default

    Quote Originally Posted by joecar View Post
    Compare the tune against a stock tune to see if any DTC's have been disabled.

    Check also these components for correct operation: TPS, VSS, ECT, IAT, TFT, MAP, MAF.

    Also look at the TSTATE07 and TSTATE08 pids.
    i cant compare the tune with a stock one because its locked because it was tuned by nelson out of texas.

    i did make a small log in the driveway. it included pids you listed above. im not sure how to check if they are working correctly.
    Attached Files Attached Files
    has no idea how to tune!!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. New V2 License How long till it gets emailed?
    By MN C5 in forum Purchase and Shipping
    Replies: 7
    Last Post: June 11th, 2008, 02:45 PM
  2. Shift Point Adjuster not working?
    By Ninety8C5 in forum Gen III V8 Specific
    Replies: 1
    Last Post: October 16th, 2007, 03:09 PM
  3. shift point adjustment not working anymore
    By Alvin in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 19
    Last Post: October 2nd, 2007, 12:57 PM
  4. Idles fine till I turn on AC
    By skippy in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 8th, 2006, 04:02 AM
  5. How long till we can tune 98/97 ls1's.
    By red12secz28 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 3rd, 2005, 01:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules