Results 1 to 3 of 3

Thread: Bootloader Rejected - Multiple PCMs Different Calibration Files

  1. #1
    Senior Member
    Join Date
    Aug 2006
    Posts
    192

    Default Bootloader Rejected - Multiple PCMs Different Calibration Files

    Any ideas why I'm having difficulty with an update or full flash? This is the error I get...



    This happens with two PCMs. Both are programming fine with GM's TIS-SPS system. EFILive will only read the calibration file, not write.
    24x LS1 PCM on Early Small-Block Chevy and LT1/LT4
    http://www.eficonnection.com

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,128

    Default

    Do you have any other PCM's there that haven't been touched by TIS?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Senior Member
    Join Date
    Aug 2006
    Posts
    192

    Default

    Quote Originally Posted by GMPX View Post
    Do you have any other PCM's there that haven't been touched by TIS?
    I don't, but the problem resolved with a laptop reboot.
    24x LS1 PCM on Early Small-Block Chevy and LT1/LT4
    http://www.eficonnection.com

Similar Threads

  1. bootloader rejected
    By relentless addiction in forum Duramax LLY
    Replies: 20
    Last Post: May 25th, 2010, 07:26 PM
  2. Bootloader rejected
    By lilly in forum Duramax LLY
    Replies: 12
    Last Post: June 28th, 2009, 02:48 AM
  3. Bootloader Rejected error during reading calibration data
    By Godwin1245 in forum Gen III V8 Specific
    Replies: 8
    Last Post: January 26th, 2009, 01:25 PM
  4. bootloader rejected
    By dmax687 in forum Duramax LLY
    Replies: 3
    Last Post: November 8th, 2008, 12:43 AM
  5. Bootloader Rejected
    By KWSUNDELL in forum Duramax LLY
    Replies: 12
    Last Post: October 21st, 2007, 08:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •