After I flashed both a stock tune from tunefile and my tune from Kory at PPE, I would start my truck and it would shut off. I would start it up again and it was fine. Just curious if this is normal or not.
Thanks- Corey
After I flashed both a stock tune from tunefile and my tune from Kory at PPE, I would start my truck and it would shut off. I would start it up again and it was fine. Just curious if this is normal or not.
Thanks- Corey
2007 5.9 SBT & ATP Tuning
Any lights on the dash??
Les Szmidt
2007 5.9 Dodge Ram
2014 Ram 3500 Aisin tuning Emissions Equipped
EFI Live Cummins BETA Tester
Silver Bullet Tuning
silverbullettuning@gmail.com
www.youtube.com/ljszmidt
http://www.facebook.com/SilverBulletTuninig
Nope. It just shut off and I turned it back to start again and it started up ran fine. It acted as if nothing happened. Tomorrow maybe I should flash my stock tune and log what happens before I start it?
2007 5.9 SBT & ATP Tuning
when i tried to pull my stock file off my truck I could not get it to load it kept getting a script problem, i was thinking it was from the smarty being on there. I finally went to depot file and flashed a stock tune in my truck, I have no dash light or anything everything works fine. Other then everytime i change my tune and reflash the truck with it does the exact same thing you are saying, so now when its done flashing just turn the key off for the ten seconds like it says, Then on and back off then it starts fine. The problem only occurs right after flashing, After that it always starts first key on. Wonder if its something to do with it not bein the actual stock tune from that ecm
Black06MegaCab/DTT/TDC/EFI LIVE/Gauges/Raptor150/HTTss62-71/AFEPusher/5''ss/TGC8inLongArm/Fox/38''MG ..... RED / 2005 / QCSB / G56 / SBDD / TST / Smarty TNT / ETC... K.I.A.
Good question, and thanks for the tip. I pulled my tune from the depot as well.
2007 5.9 SBT & ATP Tuning
This is a security issue related to the vin... as I said, if this is the tune you sent me that you changed the vin to match that of your truck and it doesn't start...you have entered a invalid vin...or simply didn't save you vin in the .tun file. More than likely your truck will now have the airbags and ABS light on due to a mismatch when the truck cranked. Regardless, double check your vin that's in the tune file against that which is in your truck (drivers side door). If the vin in the tune doesn't match that of the truck...this may happen.
That is wired that it randomly smarts working though.... especially with no lights on the dash?
This is a security issue related to the vin... as I said, if this is the tune you sent me that you changed the vin to match that of your truck and it doesn't start...you have entered a invalid vin...or simply didn't save you vin in the .tun file. More than likely your truck will now have the airbags and ABS light on due to a mismatch when the truck cranked. Regardless, double check your vin that's in the tune file against that which is in your truck (drivers side door). If the vin in the tune doesn't match that of the truck...this may happen.
Yep my vin matches, but it worked afterwards and no lights nor repeated actions. mmm this tune is nice for a "starter tune" nom nom
Last edited by cmcz450; March 27th, 2012 at 01:48 PM.
2007 5.9 SBT & ATP Tuning
I've had that happen one time on my truck. Using the 2602 OS and changing many different things in axis tables. But that was a couple release versions back..
Joel
-6.7 powered 2006 Ram QC 4x4 Auto, EFI Live, Garrett, Thuren.
-08 Chevy Silverado 4x4 5.3, built 4l70E, COMP cam and Thorly headers.