If I wanted to flash an ECM using the FlashScan as a pass-through device, is it J2534 compatible for use with Chrysler's flashing application?
If I wanted to flash an ECM using the FlashScan as a pass-through device, is it J2534 compatible for use with Chrysler's flashing application?
EFI Live - The Smarter way to tune!
2006 Ram 2500 4x4
No it's not. If you did want something for that the Drewtech devices are pretty cheap.
I no longer monitor the forum, please either post your question or create a support ticket.
Ok I just wanted to check, thanks!
EFI Live - The Smarter way to tune!
2006 Ram 2500 4x4
I use my Drew Tech for all my factory flash programing (except the 5.9 Cummins)
Yeah I was just going to use my TechAuthority subscription to save a copy of the updated stock file for my truck so if anything ever went wrong I could reprogram it with my Starscan.
EFI Live - The Smarter way to tune!
2006 Ram 2500 4x4
Read all the precautions about flashing the 5.9L. I have locked 2 ECM's on a 1999 trying yo use my Cardaq. Ford,GM and the 6.7L Dodge have no problems
Well Chrysler states in the TechAuthority which pass-through devices they recommend for flashing with no problems.
EFI Live - The Smarter way to tune!
2006 Ram 2500 4x4
I don't know where it says which devices they recommend, I'm just saying be careful using Drewtech on the 5.9L Cummins
I've never heard of Drewtech before, so I would have to do some research on it first before I decided to buy.
In order to use either the J2534 Application or the Chrysler J2534 Flash Application you must first purchase a J2534-1 compliant device (such as CTC VehicleBox Device , Actia I+ME PassThru+XS , BSE 2534 Global Programmer ).
EFI Live - The Smarter way to tune!
2006 Ram 2500 4x4
I no longer monitor the forum, please either post your question or create a support ticket.