So what if I have an E67 with a T? 5L40E will this table show up for me?
So what if I have an E67 with a T? 5L40E will this table show up for me?
-Adam Chant
Tune it or lose it!
2007 Saturn SKY 2.4L Automatic - E67
EFILive Tuned
I no longer monitor the forum, please either post your question or create a support ticket.
Ross does this table have anything to do with the nasty brake torque management on the later 2010+ 6L80 SUV transmissions? Last year when I messed around with tuning a 2011 Escalade, we could never get the thing to 60' better than 2.5 or something...ECM wouldnt give 100% throttle until ~75 feet off the line after the brake was released! Tried pulling the ABS/stabilitrak fuse etc...but it was something in the TCM.
2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison12.9s @ 108 mph
many thanks to Ross and Paul
No Ben, it doesn't.
Of course you need to turn the traction control off (I assume you can do that in an Escalade), and have {B2523} TCS Off Disables BTM set to Yes.
I no longer monitor the forum, please either post your question or create a support ticket.
Hello everybody,
I have been doing some playing around with my reported torque settings and settled on 15% raise and have my shift times at around .30 sec at low load down to .15 at WOT (thanks Rhino79 ) Seems to be shifting very nice with no flaring or harsh changes.
Tranny shift times.ctz
VVE13 rev6.ctz
Thanks for the input! I ran at the track with my only mods being long tube headers, cai, and tune on my 2010 l99 ss, 12.40 at 113! 1.91 60' on stock pirelli tires too. Very happy with the performance of the car and the consitency of the shifts now.
No prob man! I love the 6l80 tuning now! Add desired tcc slip and imo it will be complete!!!!!!!!
TCC slip tables were added in the latest release
I'm really happy to read that everyone has had great improvement with the torque tables.
I no longer monitor the forum, please either post your question or create a support ticket.