Thanks so much ross. And for what its worth, the torque tables work great on e38/t42 combos as well!!!
Thanks so much ross. And for what its worth, the torque tables work great on e38/t42 combos as well!!!
Interesting...going to have to play with that on my E67/T42 TBSS soon then! Working on a few other tricks for it now (running a car TCM OS so the TCC doesnt unlock when letting off the gas, simply using the car OS instead of the stock one netted me a +1mpg on a 650mi round trip) and just got my efans installed.
Should I try blanket adding like +10% to the torque tables and seeing how the trans shifts?
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
I no longer monitor the forum, please either post your question or create a support ticket.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
so has anyone else played around with b3001 - b3003 yet?
I have increased mine but I havent done any wot runs, just along with the existing 15% increase in the other torque model table shifts are pretty firm at mid to high throttle. which is what i expected having only adjusted the 40-100% table.
Absolute Difference
New Configuration
Original Configuration
These will make a difference, but, a much smaller one. In early testing these were the only tables we had put in. Putting the values from a LS7 in to a L98 made a difference, just not enough. But it certainly wouldn't hurt to change them.
The thing is, to get the desired results there is really only one table that needs to be changed, changing it (at least on a non VVT engine) is very simple and doesn't need to be scientific, plus you can log a PID that shows the torque value so you know how much things changed. I look at it from this approach, you stick a BluRay disc in the player and press play, do you have to know the technical details behind how the picture gets to the screen or do you just sit back and enjoy the movie for what it is.
There is no more 'raw' data than what you see on the screen.
I no longer monitor the forum, please either post your question or create a support ticket.
I'd prefer to know how the torque estimation happens, or at least what variables are involved.