2. 2nd tab - Chatter - this is more difficult to decipher - I have six pieces of information and I am not sure how to translate them in to V4
a. Mode 8 Stop Chatter - 0xF4 0x56 0x08 0xAE
b. Reply - Mode 8 Stop Chatter - Timeout=200ms, Payload Offset (Dec)=3, Payload Size (Dec)=3, Body Size (Dec)=3)
c. Macro - Mode 8 Stop Chatter -
i. Command
ii. Mode 8 Stop Chatter
iii.Reply - Mode 8 Stop Chatter
d. Mode 9 Start Chatter - 0xF4 0x56 0x09 0xAD
e. Reply - Mode 9 Start Chatter - same as Mode 8 Stop Chatter
f. Macro - Same as Mode 8 macro except 8 and stop are replaced with 9 and Start

I assume this stop and start equates to V4's Suspend and Resume - correct?

Seems like I have the resume and suspend commands, but what about Heartbeat? Obviously I guess I could connect and determine it per the V4 documentation instructions but I am guessing I already have it in Tunerpro - I just don't recognize it.

Also, I assume I should check the reply check boxes in Chatter?