Is there a reason my RR will not log oil pressure, when I go to the vehicle computer it logs it OK (LS1)
Is there a reason my RR will not log oil pressure, when I go to the vehicle computer it logs it OK (LS1)
Oil pressure can be logged only if the VIN is from a Corvette (since Camaro/Firebird, GTO, Commodore did not connect oil pressure to the PCM)...
i.e. VIN has to start with something like 1G1YY.
So full flash the program that allows oil pressure and put in calibration should work?
No, just use the scantool to change the VIN (you have to come up with a valid Corvette VIN), see if that works first.
But if oil pressure is low it comes up with a warning on the dash so is it only connected to the BCM in a Holden ?
"Just a tune > yeah right !!!! "