Page 8 of 16 FirstFirst ... 678910 ... LastLast
Results 71 to 80 of 154

Thread: Improving shifts via the ECM

  1. #71
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default

    Quote Originally Posted by scottcmb View Post
    Have you played with the "Minimum Final Timing" in the ecm tune to go with your TCM adjustments yet?
    no i haven't played with the ecm tune EXCEPT for the torque model but i THINK its running less final timing as its camed + F.I 10 PSI
    ill have to check it against a stock tune
    witch i don't have

  2. #72
    Lifetime Member Rhino79's Avatar
    Join Date
    Jul 2006
    Posts
    298

    Default

    WHen you get to a point with the 6l80s, it will go backwards in feel...lol.
    Head Calibrator
    Gwatney Performance Innovation
    Jacksonville, AR 501-982-2102

  3. #73
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default

    should i up the SHIFT presures and TCC presures now as they are all still stock ? if so by how much %
    with lots of torque 1024 NM showing on the TRQENG PID

  4. #74
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    950

    Default

    1024nm in trqeng pid is plenty enough. mine show'd just over 1050 when i ran 10.6 the other night.

  5. #75
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default

    that is a great ET ,is that a record for A6 on street tyres ?

  6. #76
    Member
    Join Date
    May 2012
    Posts
    68

    Default

    With VVT, do we just do the increase on all 4 tables with regard to RPM_Airflow?

    Thanks,

    John

  7. #77
    Lifetime Member Rhino79's Avatar
    Join Date
    Jul 2006
    Posts
    298

    Default

    I do, seems to work good.
    Head Calibrator
    Gwatney Performance Innovation
    Jacksonville, AR 501-982-2102

  8. #78
    Senior Member
    Join Date
    Apr 2005
    Posts
    126

    Default

    As I have been digging trying to find a definite answer on reducing the amount of torque reduction on the shifts ( I see as much as 40+ degrees on the shifts on the E67/T43 CTS-V), it seems that no one really knows how to adjust it. It was asked on a couple of occasions which of the torque tables apply for a non adjustable cam in the LSA, with no clear response. Just 'the tables mentioned in this thread'. Well no specific tables have been called out. I am assuming that it is ALL of the tables listed under Normal fuel Exhaust CAM 0 Degrees, but haven't seen actual clarification. Also B5156 lists maximum spark retard for knock, torque reduction etc... which CLEARLY isn't an accurate description because my table is set to a maximum of -20 and I am seeing over 40 taken out. Would it be that difficult to list the tables and options SPECIFICALLY related to these changes by their table numbers?

  9. #79
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    950

    Default

    easiest way it to adjust the ecu tune and the minimum timing table in the spark area.

  10. #80
    Senior Member
    Join Date
    Apr 2005
    Posts
    126

    Default

    Quote Originally Posted by Tre-Cool View Post
    easiest way it to adjust the ecu tune and the minimum timing table in the spark area.
    This really doesn't help. Unless I am missing something...if I set those tables to numbers that would be more realistic to handle spark retard on shifts, it would clamp the lower limit to numbers that would prevent an active knock sensor from being useful.

Page 8 of 16 FirstFirst ... 678910 ... LastLast

Similar Threads

  1. How mcuh should be A/F between shifts ?
    By wesam in forum Gen III V8 Specific
    Replies: 3
    Last Post: September 20th, 2010, 06:14 AM
  2. spikes during shifts??
    By drdarthinvader in forum Gen III V8 Specific
    Replies: 6
    Last Post: January 9th, 2009, 04:02 PM
  3. Shifts to soft from 1>2... HELP!
    By LS1FREEK in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 11
    Last Post: June 26th, 2008, 11:10 AM
  4. ETC help on shifts please.
    By azzhauler in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: November 8th, 2006, 10:20 AM
  5. Replies: 0
    Last Post: February 6th, 2006, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •