I can't log any data after altering calc.pids to use an analog WBO2 for CALC.VET.
Also my CALC.SELBEN pid wont work, because it says i need to select CALC.PE, which i can't find.
I can't log any data after altering calc.pids to use an analog WBO2 for CALC.VET.
Also my CALC.SELBEN pid wont work, because it says i need to select CALC.PE, which i can't find.
Last edited by joecar; January 20th, 2013 at 10:32 PM.
| 2000 firebird | LQ4 | LS3 top end | 226/231 .600 .602 114 | TCI 3500 | 3" x-pipe under-axle | BMR everything |
What is your V8 build version...?
What is your V2 firmware version...?
Did you program the BBx config into V2...?
On the PIDs tab, if you click the column title heading "Caption", and then click it again, the pids are sorted alphabetically on this column, so you can then scroll down until you see the pid.
BTW: you can also grab a screenshot by pressing the PRTSCR button on your keyboard, then opening Paint and pasting and saving to file.
Please post your calc_pids.txt
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
BTW: CALC.PE was replaced with CALC.CL in the calc.vet tutorial/thread a while back.
I'll post all this tomorrow.
| 2000 firebird | LQ4 | LS3 top end | 226/231 .600 .602 114 | TCI 3500 | 3" x-pipe under-axle | BMR everything |
i've been pretty de-motivated to do anything to the car lately. it seems like i take one step forward and three steps backward regarding software/WB, etc.
attached is my calc.pids.txt
| 2000 firebird | LQ4 | LS3 top end | 226/231 .600 .602 114 | TCI 3500 | 3" x-pipe under-axle | BMR everything |
Have you does this:
more info: Setting-up-a-FSV2-from-scratch
Yes, use that calc_pids.txt, and follow the Calc.VET thread (is this your intent...?).
Don't be discouraged... it simply is a matter of the learning curve.