Calc.VET: correcting MAF and calculating VE (in single log)

[COONDOG96]

Log_0005CAL.VE.efi

[COONDOG96]

I hope the log got there I can't open it anymore no scan or tune

[joecar]

logError code: ERR_WIN 0/0

Cannot open file "C:\Users\Owner\Documents\EFILive\V7.5\User Configuration\calc_pids.txt". The system cannot find the file specified

Start scantool, go Edit->Properties->Folders, highlight User Configuration, click Browse and browse to the correct folder, click Ok, click Ok...

exit scantool and restart it.

[joecar]

I can see the log file...

[COONDOG96]

Can't as soon as I x out the err. report it closes the sacn tool

Start scantool, go Edit->Properties->Folders, highlight User Configuration, click Browse and browse to the correct folder, click Ok, click Ok...

exit scantool and restart it.

[joecar]

Hmmm... DAT is high at 154F.

[COONDOG96]

I know that it an air temp but it comes from what?

Hmmm... DAT is high at 154F.

[COONDOG96]

It is a blown motor so iat is in the upper plentom

[joecar]

I know that it an air temp but it comes from what?

It comes from the blend of IAT and ECT according to table B4901 in your tune file.

[joecar]

It is a blown motor so iat is in the upper plentom

Ok, understood.